HUSQVARNA P-ZT 54
The rugged blade spindle assembly features cast aluminum construction and greasable tapered bearings.
Easy-access Service Points
Oil and filter maintenance, hydraulic drive system components/adjustment, electrical system and battery are all within easy reach so you can quickly get back to being productive.
Thick cushions and EVC (elastomeric vibration control) provide unsurpassed comfort for the operator. The two tone vinyl covers are replaceable in the event of damage.
Roll Over Protection System (rops)
The practical foldable ROPS protects the user and can be lowered in areas with low-hanging branches.
317 Litre Collection System
Increase productivity and versatility with a 317 litre triple bag collection system. Unique design removes or installs in a matter of minutes.
Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.
Commercial Drive System
Hydro-Gear's ZT3400 series commercial transmissions are fully serviceable and offer higher ground speeds with smooth performance.
Commercial Duty Chassis
The chassis is constructed of 2” x 3” steel tube with 11 gauge wall thickness for superior strength and durability. The open design also allows for more convenient servicing and reduced debris buildup.
Heavy-duty Canister Air Filter
The heavy-duty canister air filter provides maximum protection for the engine in tough mowing conditions.
Low centre of gravity and wide stance ensure exceptional stability and riding comfort. Wide tyres reduce grass compaction.
Convenient Operator Interface
The control panel is ergonomic in design and within easy reach of operator.
Large Fuel Capacity
11.4 gallons (Dual 5.7 gallon tanks) for up to 12 hours of mowing time. Large 3.5 inch diameter refill tube for easy refuelling.
Optional Light Kit
Optional high powered clamp on style headlights feature simplified installation, plug directly into harnesses on 2005+ units and are functional with existing key switch.
|Engine name||FX Series|
|Net power at preset rpm||18.3 kW @ 3600 rpm|
|Cylinder displacement||44.3 cu.inch / 726 cm³|
|Air Filter type||Heavy-Duty Canister Style|
|Fuel tank volume||11 gal. / 41.6 lit|
|Fuel tank location||Side (Dual)|
|Engine lubrication type||Full pressure|
|Oil capacity||70.4 fl oz / 2.1 lit|
|Tyre size, front||13x6.5-5"|
|Tyre size, rear||23x10.5-12"|
|Wheelbase||51 " / 129.5 cm|
|Base machine, length||81 inch / 205.7 cm|
|Base machine, width (chute down)||65.5 inch / 166.4 cm|
|Base machine, width (chute up)||53.5 inch / 135.9 cm|
|Base machine, height (ROPS down)||46 inch / 116.8 cm|
|Base machine, height (ROPS up)||72.5 inch / 184.2 cm|
|Weight||1070 lbs / 485.4 kg|
|Transmission model||ZT 3400|
|Pump displacement||12 cm³|
|Speed forward, min-max||0-10 mph / 0-16.1 km/h|
|Speed reverse, min-max||0-5 mph / 0-8 km/h|
|Seat back height||High|
|Hour meter||Digital with pre-programmed service intervals|
|Productivity||4.2 acres/hr / 16996.8 m²/h|
|Cutting width||54 inch / 137.2 cm|
|Cutting deck type||Fabricated flat|
|Cutting methods||Collect/Mulch/Side ejection|
|Cutting deck material||Steel|
|Deck thickness||10 gauge / 3.6 mm|
|Cutting height, min-max||1.5 - 5.5 inch / 38.1 - 139.7 mm|
|Cutting height steps||17|
|Blade engagement||Electric clutch|
|Clutch rating||150 ft.lb / 203.4 Nm|
|Blade-tip speed||18500 fpm / 93.9 m/s|
|Deck lifting system||Manual, foot activated|
|Powder-coated cutting deck||Yes|
|Spindle/mandrel type||Aluminium, commercial|